Hungarian (formal)English (United Kingdom)
Thursday, 17 October 2019
uzem1.jpg
Surface treatment

   VT Metal Kft. operates the largest galvanisation workshop in Hungary.  We can offer a wide range of our galvanisation technologies to our customers. We are galvanising almost 1 million m2 part surface according to the requirements of our customers.
  In case it is necessary, with our advise, we can also join the design work of the coating.  

 

We are pleased to take part in the product design, this way the fabrication of a “galvanisation friendly” product can be made easier. 

 

 

You will save costs if you already involve our experts even in the design phase of the part.>A determinant portion of our capacity is engaged by the galvanisation of automotive parts, but besides these, we are galvanising parts for a number of other industries, as well. 

 

In case a special contract has not been made, we are supplying to our customers according to our
General Terms and Conditions.
 

In our workshop it is possible to produce the next kinds of coatings below:
 

  • Zink-plating
  • Engineering Support
  • Assembly

Automated and manual zinc plating, production takes place in turning drums or hanging, with various kinds of chromate conversions, several decades of experience and well trained specialists.

Capabilities:

  • Bright, blue, yellow and black chromate conversions
  • With Cr III and Cr VI contain
  • Well equipped laboratory for quality tests
  • ISO certificates
  • Assembly activity 

Part dimension  

Parts in turning drum: weight limit 50 kg/drum                      

 

Parts hanging: 2,800x800x600mm

Production capacity     

Parts in turning drum: 3,000-4,000 t/year

 

Parts hanging: 4,000-5,000m2/ year

Coating thickness

5-16 µ

Raw material
Special primary treatment

Steel
Sand-blasting with 0.2mm CrNi-steel grains, ultrasonic fine-degreasing, trichloroethylene degreasing .

Primary processes

Zinc plating in acid and alkaline bath/ parts hanging or in turning drum.
passivation: yellow (Cr VI),blue (Cr III), black (Cr III)

Automation

5 PCs of automatic, 2 PCs of manually controlled zinc plating lines

Special kinds of coating

Cr VI free black and Bluemax passivation, thick layer passivation. Without passivation.

Secondary processes   

Water basic lacquering, heat treatment (dehydrogenation, hardening)

Other services

Special packaging, dimension checking, 100 % checking

Assembly

 Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment,
Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

AutoCAD, e-mail, ability to receive drawings in  jpg, tif formats

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • Chemical Nickel
  • Engineering Support
  • Assembly

Chemically produced coating, parts hanging and in turning drums, made by well-trained experts. Technical coating, mainly applied on parts with wearing surface or products with complicated shape, machine parts.
Capabilities:

  • 3-30µ nickel coating with medium (7-9%) phosphate contain.
  • With hardening HV approx. .HV 900 hardness can be reached.
  • ISO certificates
  • Fulfilment of RoHS principles  
  • Well equipped laboratory for quality tests.

 

Part dimension

Parts in turning drum: weight limit 6 kg/drum
Parts hanging: 700x600x550mm

 

 

Production capacity   

Parts hanging: 30,000-40,000m2/ year (stamped, machined parts, processing tools, selective coating)
Parts in turning drum: 20 t

Coating thickness

3-30µ

Raw material 
Special primary treatment       

Steel, stainless steel, copper and copper alloys
Sand-blasting with 0.2mm CrNi-steel grains, ultrasonic fine-degreasing,  trichloroethylene degreasing.
 

Primary processes 

Chemical nickel

Automation

2 PCx of manually controlled line

Special coatings

Corrosion protective oiling

Secondary processes

Heat treatment (hardening) 

Other services

Special packaging, dimension checking, 100 % checking

Assembly

Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment, Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

AutoCAD, e-mail, ability to receive drawings in  jpg, tif formats

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • Nickel
  • Engineering Support
  • Assembly

Manually controlled and manual nickel plating parts hanging or in turning drums- callipers and also parts with fine thread- we have an experience of decades, with well trained experts :
Capabilities

  • Bright
  • 3-20µ
  • Well equipped laboratory for quality tests.
  • ISO certificates
  • Assembly activity 

 

Part dimension

max. 600 * 400 * 300 mm

 

 

Production capacity   

Parts in turning drum: 10 t/year  (quantity in one drum: 4-6 kg)
Parts hanging: 5,000-10,000m2/ year

Coating thickness

3-20 µ

Raw material 
Special primary treatment       

Steel, copper and copper alloys
Sand-blasting with 0.2mm CrNi-steel grains, ultrasonic fine-degreasing,  trichloroethylene degreasing.

Primary processes 

nickel plating

Automation

1 PC of manually controlled nickel plating line

Special coatings

If required, copper plating before nickel plating (hanging: at copper alloys) (In bulk: steel)                         

Secondary processes

 

Other services

Special packaging, dimension checking, 100 % checking

Assembly

 Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment, Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

AutoCAD, e-mail, ability to receive drawings in 

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • Tin
  • Engineering Support
  • Assembly

Manually controlled tin plating with copper and nickel intermediate layer, parts in turning drums we have an experience of decades, with well trained experts:
Capabilities

  • Sn 3-15µ, Cu 2-4µ, Ni 2-4µ,
  • Well equipped laboratory for quality tests.
  • ISO certificates
  • Assembly activity 

 

Part dimension

Goods in turning drum: weight limit 6kg/drum

 

 

Production capacity   

20,000 t/year

Coating thickness

3-15µ

Raw material 
Special primary treatment       

Steel, copper and brass
Ultrasonic fine-degreasing, trichloroethylene degreasing.

Primary processes 

tin plating

Automation

Manual line

Special coatings

With Cu and Ni intermediate layer 

Secondary processes

Protective finishing process

Other services

Special packaging, dimension checking, 100 % checking

Assembly

 Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment, Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

Remark

AutoCAD, e-mail, ability to receive drawings in  jpg, tif formats

We are mainly making surface treatment for companies in the Automotive Industry, assembly in most  
cases are carried out by VT Autóelektronika Kft. (for example: relays electromechanical units)

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • Silver
  • Engineering Support
  • Assembly

Manually controlled silver plating with copper intermediate layer, parts in turning drums we have an experience of decades, with well trained experts:
Capabilities

  • Cu 2-4µ, Ag 0.5-20 µ,
  • Well equipped laboratory for quality tests.
  • ISO certificates
  • Assembly activity 

 

Part dimension

Goods hanging: max. 100x400x400mm

 

 

Production capacity   

Parts in turning drums: 3,000-4,000 t/year (quantity in one drum: 5-6 kg) Parts hanging: 2,200 m2 - Cu 3-6µ, Ag 0.5-20 µ,

Coating thickness

Ag 0.5-20 µ

Raw material 
Special primary treatment       

Steel, copper and brass
Ultrasonic fine-degreasing, trichloroethylene degreasing.

Primary processes 

silver plating

Automation

Manual line

Special coatings

With Cu intermediate layer (copper plating)                         

Secondary processes

With Passivation

Other services

Special packaging, dimension checking, 100 % checking

Assembly

 Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment, Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

AutoCAD, e-mail, ability to receive drawings in  jpg, tif formats

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series.

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.(For the assembly we are using our machined parts and those we have purchased)
- Production of paint spraying equipment operating without air (types for industrial and non-industrial use) For the assembly we are using our machined and stamped parts and those we have purchased)
- Assembly of air-filters.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

 

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • Copper
  • Engineering Support
  • Assembly

Manual and manually controlled copper plating parts in turning drums, we have an experience of decades, with well trained experts:
Capabilities

  • Cu 2-15µ
  • Well equipped laboratory for quality tests.
  • ISO certificates

 

Production capacity   

Parts in turning drums: 6-70 t/year (quantity in one drum: 8-10 kg)

Coating thickness

2-15µ

Raw material 
Special primary treatment       

Steel
Ultrasonic fine-degreasing, trichloroethylene degreasing.

Primary processes 

Cyanide (in bulk)

Automation

1 PC of manually controlled line with turning drums

Special coatings

 

Secondary processes

Protective finishing  treatment

Other services

Special packaging, dimension checking, 100 % checking

Assembly

Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment, Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

Remark

AutoCAD, e-mail, ability to receive drawings in  jpg, tif formats

We are mainly making surface treatment for companies in the Automotive Industry, assembly in most  
cases are carried out by VT Autóelektronika Kft. (for example: relays electromechanical units)

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • KTL
  • Engineering Support
  • Assembly

Cataphoretic E-coat (KTL) painting line specific suspended, dipped paint supported by experienced staff.

 

  • Varios pretreatments
  • Black (RAL 9005) color paint
  • At least 720h  salt spray fog test resistance
  • Equipped lab with various tests
  • ISO certifications
  • Masking, mounting activities

Dimension

max. 2100x1250x600 mm

 

 

Capacity

800.000- 1 millió m2/year

 

 

Thickness

15-25µm ;  40+ µm

Base metals
Special pretreatments

Steel, aluminum, galvanized steel

Scratching abrasion, abrasive blasting, combined dipped-blasted degresing, tricathionic zincphosphate, „Oxsilan” , extra pickle.

Main procedure

Cataphoretic dipped paint in black color

Automation

automatic paint line

Special coatings

Galvanized zinc+ E-coat (KTL) ; KTL+ powder paint (powder paint with subcontractor)

Secondary procedure

Powder coating

Other services

masking,unique packaging, 100% testing

Mounting

Mechanical mounting

Testings

Equipped testing lab,  X-Ray thickness measuring equipments, Eddy current thickness measuring equipments, surface hardness test and roughness test , salt spray fog test, cross section test.

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Datachange

AutoCAD, E-mail, jpg, tif, dxf, pdf drawings

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu
  • Zinc-Nickel
  • Engineering Support
  • Assembly

Automated,  zinc-nickel alloy plating with various kinds chromate coatings, production takes place hanging, several decades of experience and well trained specialists.

Capabilities:

  • Transparent and black chromate conversions
  • With Cr III contain
  • Well equipped laboratory for quality tests
  • ISO and IATF certificates
  • Assembly activity

 

Part dimension

max. 2100 x 400 x 1150 mm



Production capacity   

Parts hanging: 120000 m2/ year

Coating thickness

5-12 µ

Raw material 
Special primary treatment       

Steel

Organic solvent degreasing, extra pickling can be done.

Primary processes 

Zinc-nickel alloy separation in alkaline bath / suspended version passivation: transparent (CrIII), black (CrIII) with or without protective sealing

Automation

Completely automated production line

Special kind of coatings

Corrosion protection correction bath, example for pipes without passivation.                       

Secondary processes


Other services

Special packaging, dimension checking, 100 % checking

Assembly

Mechanical assembly

Capability testing

Completely equipped measuring room, X-ray thickness test machine, portable thickness test equipment, Hardness and surface roughness tester, salt-spray testing and climate room, strength tester

Certificates

ISO 9001:2008,   ISO/TS 16949:2009,  
ISO 14 001:2004,   ISO 50001:2011

Data change

AutoCAD, e-mail, ability to receive drawings in  jpg, tif formats


Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

  • Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
  • Consequently, they bring quality to perfection and reduce production costs.
  • When required, they design new technologies, introduce and co-ordinate these.
  • They accomplish experimental production planning and co-ordination.
  • They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
-
Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

  • Preparation and introduction of new assembly technologies.
  • Design, production and co-ordination of the equipment for the proposed technology.
  • Transfer of the already existing assembly activities.
  • Sample design and production.
  • Experimental production planning and co-ordination.
Remark: In VIDEOTON Company Group there are high opportunities for almost any kind of assembly operations (SMD- insertion, electronic assembly and assembly of house-holding appliances, etc.) Please, visit www.videoton.hu

 
« StartPrev12345678NextEnd »

Page 3 of 8
, Powered by Joomla! vtmetal@metal.videoton.hu Copyright 2010, VT Metal Kft. Design:Pitti